When is address translation performed?

1. At compile time
   • Compiler generates physical addresses.
   • Requires knowledge of where the compilation unit will be loaded.
   • No linker.
   • Loader is trivial.
   • Primitive.
   • Rarely used (MSDOS .COM files).
   
   
2. At link-edit time (the ``linker lab'')
   • Compiler
     • Generates relocatable addresses for each compilation unit.
     • References external addresses.
   • Linkage editor
     • Converts the relocatable addr to absolute.
     • Resolves external references.
     • Misnamed ld by unix.
     • Also converts virtual to physical addresses by knowing where the linked program will be loaded. Linker lab ``does'' this, but it is trivial since we assume the linked program will be loaded at 0.
   • Loader is still trivial.
   • Hardware requirements are small.
   • A program can be loaded only where specified and cannot move once loaded.
   • Not used much any more.
   
   
3. At load time
   • Similar to at link-edit time, but do not fix the starting address.
   • Program can be loaded anywhere.
   • Program can move but cannot be split.
   • Need modest hardware: base/limit registers.
   • Loader sets the base/limit registers.
   
   
4. At execution time
   • Addresses translated dynamically during execution.
   • Hardware needed to perform the virtual to physical address translation quickly.
   • Currently dominates.
   • Much more information later.

Extensions

• Dynamic Loading
  • When executing a call, check if module is loaded.
  • If not loaded, call linking loader to load it and update tables.
  • Slows down calls (indirection) unless you rewrite code dynamically.
  • Not used much.
• Dynamic Linking
  • The traditional linking described above is today often called static linking.
  • With dynamic linking, frequently used routines are not linked into the program. Instead, just a stub is linked.
  • When the routine is called, the stub checks to see if the real routine is loaded (it may have been loaded by another program).
    • If not loaded, load it.
    • If already loaded, share it. This needs some OS help so that different jobs sharing the library don't overwrite each other's private memory.
  • Advantages of dynamic linking.
    • Saves space: Routine only in memory once even when used many times.
    • Bug fix to dynamically linked library fixes all applications that use that library, without having to relink the application.
  • Disadvantages of dynamic linking.
    • New bugs in dynamically linked library infect all applications.
    • Applications ``change'' even when they haven't changed.

4.1: Basic Memory Management (Without Swapping or Paging)

Entire process remains in memory from start to finish and does not move.

The sum of the memory requirements of all jobs in the system cannot exceed the size of physical memory.

** 4.1.1: Monoprogramming without swapping or paging (Single User)

The ``good old days'' when everything was easy.

• No address translation done by the OS (i.e., address translation is not performed dynamically during execution).
• Either reload the OS for each job (or don't have an OS, which is almost the same), or protect the OS from the job.
  • One way to protect (part of) the OS is to have it in ROM.
  • Of course, must have the OS (read-write) data in ram.
  • Can have a separate OS address space only accessible in supervisor mode.
  • Might just put some drivers in ROM (BIOS).
• The user employs overlays if the memory needed by a job exceeds the size of physical memory.
  • Programmer breaks program into pieces.
  • A ``root'' piece is always memory resident.
  • The root contains calls to load and unload various pieces.
  • Programmer's responsibility to ensure that a piece is already loaded when it is called.
  • No longer used, but we couldn't have gotten to the moon in the 60s without it (I think).
  • Overlays have been replaced by dynamic address translation and other features (e.g., demand paging) that have the system support logical address sizes greater than physical address sizes.
  • Fred Brooks (leader of IBM's OS/360 project and author of ``The mythical man month'') remarked that the OS/360 linkage editor was terrific, especially in its support for overlays, but by the time it came out, overlays were no longer used.

**4.1.2: Multiprogramming with fixed partitions

Two goals of multiprogramming are to improve CPU utilization, by overlapping CPU and I/O and to permit short jobs to finish quickly.

• This scheme was used by IBM for system 360 OS/MFT (multiprogramming with a fixed number of tasks).
• Can have a single input queue instead of one for each partition.
  • So that if there are no big jobs can use big partition for little jobs.
  • But I don't think IBM did this.
  • Can think of the input queue(s) as the ready list(s) with a scheduling policy of FCFS in each partition.
• The partition boundaries are not movable (must reboot to move a job).
  • MFT can have large internal fragmentation, i.e., wasted space inside a region
• Each process has a single ``segment'' (we will discuss segments later)
  • No sharing between process.
  • No dynamic address translation.
  • At load time must ``establish addressability''.
    • i.e. must set a base register to the location at which the process was loaded (the bottom of the partition).
    • The base register is part of the programmer visible register set.
    • This is an example of address translation during load time.
    • Also called relocation.
• Storage keys are adequate for protection (IBM method).
• Alternative protection method is base/limit registers.
• An advantage of base/limit is that it is easier to move a job.
• But MFT didn't move jobs so this disadvantage of storage keys is moot.
• Tanenbaum says a job was ``run until it terminates. This must be wrong as that would mean monoprogramming.
• He probably means that jobs not swapped out and each queue is FCFS without preemption.